More and more homes are facing moisture-related problems. Normally, the humidity level of a room should remain between 40 and 60 %. However, studies reveal that the majority of living rooms have a higher than normal humidity level. So what are the reasons why living rooms are often damp? What are the most appropriate solutions to remedy the situation?
Reasons why your living rooms are damp
In general, the humidity level of a tolerated dwelling is on average 50% of the air. If, on the other hand, you notice that the rate of your home exceeds the norm, then it may be due to one of these two reasons.
A problem related to the waterproofing of the dwelling
Poor sealing of your home can be the cause of the presence of moisture in your rooms. Indeed, a roof in poor condition subjected to severe weather can cause several water infiltrations inside a house.
Similarly, if your doors or windows are in poor condition, it can promote the presence of moisture. In addition, there are some rare cases in which moisture could come from the floor of your home. To get a more accurate idea of the sources, just do an air test or an asbestos test.
A ventilation and ventilation problem
Domestic work is a great source of moisture in a home. Indeed, activities such as drying clothes, cleaning rooms, cooking are among the main sources of moisture.
In addition, in order to ensure that the humidity level remains acceptable in all rooms of a house, many homes rely on ventilation and ventilation. However, sometimes ventilation and ventilation are lacking inside a dwelling. This has the effect of increasing the humidity level of the air.
The solutions that exist to evacuate water from a room
There are many solutions to reduce the humidity present in your home. However, you must ensure that they are adapted to your situation before making your choice.
Improve the ventilation of your home
Air renewal is one of the most effective solutions to remove excess daily moisture. Thus, you just have to ventilate for about 10 minutes the rooms of your home such as the kitchen, bedrooms and bathrooms.
In addition, when the humidity level present in a room is too high, the humidity can leave some unpleasant stains on your walls or furniture. In this case, you will have to use industrial disinfection services or special quebec decontamination services.
Improve the waterproofing and ventilation of your home
In addition to ventilating the rooms of your home every day at regular times, you can also set up ventilation systems to evacuate moisture more easily. In addition, the tightness of your home is a factor that you should monitor regularly. Your roof, windows, walls and floors of your home are elements that you must inspect in order to repair all the defects that can cause water infiltration.
In addition, it is also necessary to make sure that the ventilation system put in place is sufficiently effective and that nothing prevents air circulation. Finally, each joint in your bathrooms must be examined regularly.
What about natural methods?
Apart from the previous solutions, you can opt for the traditional methods. Some natural tricks and techniques can help you absorb moisture from a room.
To remove excess moisture from your home, simply design a moisture absorber. It is recommended to use for your absorber clay and coarse salt which are two products with exceptional absorption properties. When designing your moisture absorber, take a plastic can or bottle and cut it in half.
Then you need to turn over the upper part that has a neck and superimpose it on the lower part of the container. Then, put a piece of cloth or cotton at the cap and pour a little crushed clay or coarse salt. Finally, position your absorber in the damp room against a wall to turn moisture into a drop of water.
Some tips to reduce mold
When your tissues are infected with mold, the easiest solution to do mold decontamination is to rub the fabrics with a mixture of lemon juice and a spoon of salt. This residential disinfection trick also works to clean the tiles of a shower or bathtub. However, for this specific case, it is advisable to use a dry cloth to clean the premises.
In addition, you can design a mixture of vinegar with two-thirds of demineralized water. Then apply this mixture to the walls and let it act for about 15 minutes before rinsing. This allows you to perform asbestos decontamination without difficulty.
If the mold is too impregnated, you can use a solution based on bicarbonate and salt to brush the surfaces of the walls.