Fungi appearing in wet areas, molds are plant species that must be disposed of very early. The fact is that they are very dangerous. There are several anti-mold products, but they are not all equal in terms of effectiveness. At Groupe Enviro Santé Québec, we use several anti-mold repellents, some of which are listed below.

Hotrega anti-mold cleaner

Hotrega anti-mould provides long-term protection against mould. In its presence, these fungi do not appear, but above all do not manage to multiply. Hotrega cleanser is also a very effective product against microbes. You can apply it to any masonry support with mold. It helps you easily remove mold from your tile joints and painted walls.

Hotrega detergent in a 50 cl container is odorless and perfectly transparent. Therefore, you can apply it in your different living rooms including the sleeping room without any health risk.

Anti-mold spray SPADO

SPADO anti-mold is a detergent designed to prevent and eliminate mold in bathrooms. It is a 2-in-1 product, as it is effective in eliminating these fungi. What’s more, it is also used to disinfect the contaminated area. Sold in a 500 ml container, this detergent should be sprayed at least 15 times on the area to be treated. After application, the product must be allowed to act for 15 minutes before rinsing the treated surface. Repeat the decontamination operation if you feel that the first one has not satisfied you.


Anti-mold Starwax joints

For the decontamination of bathrooms, kitchens and other wet areas of your home, one of the most effective products is Starwax anti-mold. This spray is suitable for cleaning shower curtains, tile joints, silicone or rubber seals, etc.

In order to avoid absorption during use, apply the product exclusively to a non-porous surface. Starwax anti-mold spray contains surfactants. Therefore, decontamination creates a film layer that effectively prevents the proliferation of fungi and bacteria. Its fast and effective action makes it possible to get rid of black traces and disinfect the parts after 20 minutes.

Anti-mold Sodac Industrie

In a 5 L container, Sodac Industrie anti-mold is a professional water repellent for use on wood. It prevents the penetration of water into the pores and capillaries of porous materials such as wood. This water repellent forms an airtight and waterproof film while allowing the application surface to breathe.

Very penetrating, the product dries quickly, regardless of the support on which it is applied and without changing the appearance of the latter. Under normal drying conditions, you will have the results of this professional anti-mold after 4 to 6 hours.


ARCANE INDUSTRIES antifoamer is a 2-in-1 solution against fungi. By using it, you delay the appearance of green deposits again. In addition to its effective action against mold, it eradicates algae and lichens. Being a chemical to use carefully, you need to spray it in clear weather. However, this is not an aggressive article. You can therefore apply it on any material including your roof, balcony, walls, tennis courts, etc. After decontamination, you can paint the treated surface as you wish.

Anti-mold Cif Ultimate Clean

Cif Ultimate Clean is an anti-mold marketed in spray form. It contains bleach. Hence its effectiveness in completely eliminating visible mold in the contaminated area. It makes it possible to decontaminate several types of surfaces including:

  • Toilets;
  • Bathtubs;
  • Showers;
  • Tiles;
  • The joints…

By spraying this product marketed in a batch of 2 containers of 435 ml, you will effectively and quickly get rid of mold present in any wet area.

If you have any doubts, contact GESQ. Our team is available to help you choose the appropriate anti-mold product. We are also ready to provide you with advice.